Inkjet Print Head Cleaner for 902 564XL Ink Cartridges Work with Officejet 6950 6954 6962 6960 6961 6515 6512 Photosmart C410A D7560 Printer Cleaning Kit – 100 ml

Printhead cleaner is used for 902XL 564XL ink cartridges only, not for 950 951 952 932 933XL ink cartridges.

How to use?
1.Pre-heating the cleaning fluid.
2.Remove ink cartridges and the print head.
3.Choose the right type of syringe according to the color of the clogged print head that needs to be cleaned.
4.Leaving the bottom of the print head be soaked for about 8 hours. then Inject the cleaning fluid into the print head that needs cleaning with a syringe.
5.Install the print head into the ink cartridge and load the printer, then run the “nozzle cleaning” function twice in printer driver.

PS: Please refer to the manual instructions for more details.

Notice:
1.After removing the ink cartridges, you could wrap them in plastic wrap and put them in a ziploc bag to prevent them from drying out.
2.The print head must be completely dry after being soaked, and then it can be installed in the printer. Otherwise it may cause short circuit that will lead to the damage of the print head.
3.Don’t skip the longer soak if the shorter ones don’t work. If that fails, It is recommend to try again after a day or two.

Package:
1× Printhead Cleaning Fluid(100ml)
2× Syringe(10ml)
1× instruction manual

Printhead cleaning fluid could quickly breaks down dried inks to solve illegible marks caused by print head clogging.(vertical stripes, horizontal stripes, text printing or incomplete patterns.)
Inkjet printhead cleaner contains high-performance ingredients such as active enzymes, strong cleaning, Eco-friendly material could protect the print head.
It’s safe and simple to use! No need to wait for a clog to ruin your print job and save your money to buy a new printer.
Depending on your printer model, you may need to run several print head cleaning cycles, It’s about 2-3 times to completely flush the cleaning solution. The effectiveness of this product depends on the time of inactivity of your printer.
Printhead cleaner applies to OEM/factory ink, dye, pigment, sublimation ink, heat transfer ink and alike. Don’t use this product if the “nozzle check” appears the pattern as Figure 7.