WayPonDEV Banana PI BPI M2+ (M2 Plus) Allwinner H3 Quad Core Single Board Computer Supports Raspbian and Android, Ubuntu Linux

HardWare Specification of Banana Pi M2+(Plus)

CPU: H3 Quad-Core Cortex-A7 H.265/HEVC 4K

GPU: Mali400MP2 GPU at 600MHz, supports OpenGL ES 2.0

RAM: 1 GB DDR3 (shared with GPU)

Flash: 8GB eMMC flash on board

Network: 10/100/1000 Ethernet

WLAN and BT: SDIO AP6212 for WLAN and BT 4.0 (option AP6181 AP6335)

Video input: One CSI input connector Camera: 1 Supports 8-bit YUV422 CMOS sensor interface, 2 Supports CCIR656 protocol for NTSC and PAL, 3 Supports SM pixel camera sensor, 4 Supports video recording solution up to 1080p at 30 fps

Video Outputs: Supports HDMI output with HDCP, Supports HDMI CEC, Supports HDMI 30 function, Built-in CVBS, Supports HDMI and CVBS simultaneous output

Audio outputs: HDMI

Power Supply: 5V/2A DC input can supply power, but USB OTG input does not supply power

USB 2.0 ports: two USB 2.0 HOST, one USB 2.0 OTG

GPIO: 40-pin header, compatible with Raspberry Pi B+

LED: Power LED and Status LED

IR: IR input on board

Operating system: Android, Ubuntu, Debian, Raspberry Pi Image/Raspbian)

-In the box-

Banana Pi M2+(Plus) Development Board x1

-After Sales Team-

monica#smartfire.cn(#——@) Skype: monica_9122

Banana PI BPI-M2+ is the open source hardware platform,Banana PI BPI-M2+ is an quad core version of Banana Pi,it support WIFI on board. use Alliwnner H3 chip on board. and mini size only 65mm*5mm
Connectivity: SDIO wifi & BT4.0 module on board, also supports 10/100/1000 Ethernet
4K Display Support: It supports 1080P high-definition video output and 4K support; Mini size only 65mm*50mm
Operating System: Banana Pi BPI-M2+ runs on Android, Debian Linux, Ubuntu Linux, Raspberry Pi Image (Raspbian) and other images.
Wiki: https://wiki.banana-pi.org/Banana_Pi_BPI-M2%2B. If you have any questions, please post them on our forum: https://forum.youyeetoo.com/